DJI Naza M V2 Multirotor Flight Controller
|
|
DJI 5.8GHZ Video Downlink (Transmitter + Receiver) [DJI-5.8VDL]
|
|
|
|
|
|
|
Preorder now! Soon to be released in the US NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a small all-in-one module. It has D-Bus support, upgrade support, and extendible port. Different from WooKong-M for heavy payloads and aerophotography, NAZA not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience. The new Naza M V2 improves upon the performance of the Naza M and adds features sucha a Compass self tuning, RTH via switch, advanced IMU calibration, and the bility to interface with the DJI OSD and video transmitters for FPV and video streaming. A great upgrade.
|
The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ.
The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission
|
|
|
|
HSD52501 DS525M Digital Servo
|
|
HSD51501 DS515M Digital Servo
|
|
|
|
|
|
|
A powerful and precise metal geared servo suitable for cyclic and tail servo applications for Trex 500 and other applications using mini size servos.
|
A powerful and precise metal geared servo suitable for demanding cyclic servo applications for the Trex 500 and other applications using mini size servos.
|
|
|
|
H70109 T-REX550-700 Hardware Bag
|
|
H60239A 600DFC Main Rotor Head Upgrade Set
|
|
|
|
|
|
Use for T-REX 550E/600/600 Nitro ,700E/700N.
The most comprehensive parts assortment Align has ever produced!
|
Following the Trex 700 DFC’s design, the 600 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed with extremely attractive design. Use for Trex 550 / 600n / 600ESP / 600Pro
|
|
|
|
H60252 600 Tail Torque Tube Unit
|
|
DJI Phantom Screw Pack
|
|
|
|
Our Price: $11.79
In Stock
|
|
|
|
|
Brand new tail gear box with higher material quality and easy maintenance. Utilizes dual point attachment design for zero play and higher precision control feel.
Constructed with 6061-T6 CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.
Use for T-REX 550/600.
|
Screw Pack for the DJI Phantom Quadcopter
DJI Spare Part No.16
Includes:
(12) M1.6 x 4.0
(05) M1.6 x 4.5
(18) M1.6 x 6.0
(04) M2.0 x 4.5
(08) M2.0 x 6.5
(05) M2.0 x 8.0
(14) M2.5 x 5.0
(14) M3.0 x 6.5
(20) M3.0 x 8.0
|
|
|
|
ZAP® GOO
|
|
ZAP® Gel 3 Gram
|
|
|
|
|
|
|
Strong flexible adhesive/sealer. Bonds anything. Bonds can be cut with a razor knife. ZAP GOO is an excellent adhesive for today's high tech composite airplane, boat, and car hobby products, and great for all of those fix-it, mend-it, seal-it, and stick-it jobs around the house. 1 fl oz tube.
|
Thickest ZAP of all - great for filling gaps. The tube comes with a long tapered tip allowing precise application. The role playing gaming industry uses it for gluing pewter and plastic figures. Fly tiers and custom lure manufactures like it because it stays where they want it. Jewelry makers like the high strength and the ability to apply just the right amount. Model builders also like the high strength features and use it for servo mounts, laminating, gluing plywood, anywhere a fast curing high strength joint is needed.
|
|
|
|
H45H004XXW 450 Plus DFC Main Rotor Grip Arm Integrated Control Link Set
|
|
3DR APM 2.5+ Assembled Set (Side entry) with Power Module/XT60
|
|
|
|
|
|
Suitable for T-REX 450 Plus DFC HeadIncludes:
●Main rotor grip arm integrated control link x 2 ●Main rotor grip linkage bearing sleeve x 2 ●681ZZ-d2 Bearing x 4(Φ2*4.5*2mm) ●Linkage rod A x 2 ●Ball link × 2
|
The incredible 3DR APM 2.5+ Autopilot and Flight Stablilization System. The APM 2.5+ autopilot system is suitable for multicopters and planes and even has firmware for helis and ground vehicles. A extremely versatile autopilot with a mature software ecosystem including Ground Controls Station and multiple firmwares for specific applications. Opensource software allows for customization if desired.
|
|
|
|
3DR Radio Telemetry Kit - 915 Mhz (US)
|
|
3DR GPS uBlox LEA-6
|
|
|
|
|
|
|
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz (US) and 433Mhz (Europe and other countries that don't allow 915Mhz); and in the following configurations: serial board (for the air) and USB (for the ground). Add this to your APM Flight controller and get Ground Control Station capability with full telemetry including artificla horizon, GPS tracking on satellite maps, battery voltage and current, ground speed etc.
|
This is our best GPS module, and significantly outperforms the Mediatek GPS due to the larger antenna and next-gen chipset. Recommended for multicopters and rover in particular, where GPS accuracy is paramount. The device itself is pretty straight-forward. It has active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units will ship pre-configured for ArduPilot Mega use. A perfect match with the APM 2.5 Autopilot.
|
|
|
|
3DR MediaTek MT3329 GPS V2.0
|
|
Traxxas QR-1 Quad-Rotor Ready-To-Fly Helicopter TRA6208
|
|
|
|
|
|
|
The popular MediaTek GPS now with battery backup for faster warm GPS locks and improved ground plane for improved satellite reception. Note that the new MediaTek has custom "DIYDrones" firmware that allows the unit to output an efficient and very compressed binary protocol (This firmware is setup for the APM flight controllers). You can still change between NMEA and Binary protocol with standard MTK messages, and switch the refresh rate between 1hz to 10hz, or set any standard serial baud rate (by default is set to 38400 bps and custom binary protocol).
|
The Traxxas® QR-1™ is the easy way to experience acrobatic flying thrills and high-speed airborne excitement. Normal Flight mode makes it easy for anyone to quickly master hovering and flight just minutes after takeoff. Quad-rotor thrust and 6-axis stabilization combine in Expert Flight Mode for lightning quick response, high-speed banking turns, flips, and snap rolls. Let go of the sticks, and the QR-1 to stable flight. A great mini quad for everyone both experienced and beginners. Backed by a great warranty and replacement program
|
|
|
|
HPAT55007 Trex 550E Integrated Main Shaft Block w/ Thrust Bearings - V2
|
|
DJI Flame Wheel F450 F550 Arm Black
|
|
|
|
|
|
|
Increase the strength and rigidity of your Trex 550 E. This Integrated main shaft block ensures the alignment of the main shaft bearings adds thrust bearing for increased bearing life and improves the rigidity and strength of the main frame.
|
Replacement Arms for the DJI f450 and F550 RC Helicopters
|
|
|
|
DJI-PHPROP DJI Phantom Multicopter Props
|
|
DJI Phantom Replacement Brushless ESC - Red
|
|
|
|
Our Price: $18.00
In Stock
|
|
|
|
|
|
8"x4.5 White Props for DJI Phantom Flamewheel, includes 1 pairs of normal and reverse props (2 props total). Works on DJI FW450 and FW550 multicopters as well.These props are DJI specific and NOT compatible with standard 5mm motor shafts used on the VC-450, etc.
|
Replacement ESC for the DJI Phantom Quadcopter. This ESC has is for the arm with Red LEDs. The ESC has the LEDs integrated on the bottom of the ESC.
|
|
|
