|
H45162 Align Trex 450DFC Main Rotor Head Upgrade Set
|
|
H45162QN Align Trex 450DFC Main Rotor Head Upgrade Set / Blue
|
|
|
|
|
|
|
Following the design of the highly acclaimed 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system realizes a extremely low CG, effectively reduces resistance during flight,
increased flight responsiveness and precision, resulting in superior 3D
performance and unimaginable flight speed with extremely attractive design.
|
Following the design of the highly acclaimed 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system realizes a extremely low CG, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D
performance and unimaginable flight speed with extremely attractive design. This 450 DFC head kit is blue.
|
|
|
|
KDE FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 450 SERIES HELICOPTERS
|
|
Trex 450 Flybarless Head Conversion Kit
|
|
|
|
|
|
KDE Flybarless head design for the Trex 450. Advanced design that needs no separate swashlocker which ensure proper phasing and increases strength and durability of the head.
Models: ALIGN TREX 450 Pro
|
RJX Flybarless Head conversion Kit for the Trex 450. This is a great conversion head for 450 size helicopters. It is not only good looking but extremely durable. It uses standard 450 Pro feathering shafts, dampers,shims and bearings to maintain compatibility with high wear items. Use your existing swashplate and go flybarless. Fits most copters with 5mm main shafts.
|
|
|
|
Xtreme Production Titanium Turnbuckles for Trex 450
|
|
Carbon Fiber Tail Boom for Trex 450 (347MM)
|
|
|
|
|
|
|
Xtreme Production Titanium Turnbuckles for Trex 450. Tired of popping off links constantly during set-ups? Want to adjust just a quarter turn? The Xtreme Productions turnbuckles are for you. Spend more time flying - make life easier!!
|
Carbon fiber tail boom for Trex 450
347mm length
Trex 450 XL/V2/Pro
|
|
|
|
Carbon Stabilizer(1.2mm)
|
|
Silver Stabilizer Set for Trex 450 Pro(1.2mm)
|
|
|
|
|
|
|
Carbon fiber horizontal and vertical carbon fiber stabilizers for the Trex 450 Pro
|
Silver stabilizer set for the Trex 450 Pro. 1.2mm
|
|
|
|
FUSUNO RED EAGLE Complete New Design EX Fiberglass Airbrush Canopy - Trex 450/V2/PRO
|
|
K&B Dream Designs Neon Orange Upgrade Kit for T-Rex 450 Pro
|
|
|
|
|
|
|
FUSUNO RED EAGLE Complete New Design EX Fiberglass Airbrush Canopy - Trex 450/V2/PRO
|
The T-Rex 450 Pro Upgrade kit is surely the best and most cost effective upgrade a Pilot can purchase for his T-Rex 450 Pro helicopter!
|
|
|
|
K&B Dream Designs Neon Green Upgrade Kit for T-Rex 450 Pro
|
|
K&B Dream Designs Midnight Black Upgrade Kit for T-Rex 450 Pro
|
|
|
|
|
|
|
The T-Rex 450 Pro Upgrade kit is surely the best and most cost effective upgrade a Pilot can purchase for his T-Rex 450 Pro helicopter!
|
The T-Rex 450 Pro Upgrade kit is surely the best and most cost effective upgrade a Pilot can purchase for his T-Rex 450 Pro helicopter!
|
|
|
|
K&B Dream Designs Neon Orange Dampeners for T-Rex 450 Pro
|
|
HR1053 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 11T 3.17mm shaft
|
|
|
|
|
|
The new KBDD T-Rex 450 Pro Dampeners add performance, stability and durability.
KBDD’s new dampeners provide better cyclic control. The T-Rex Pro will have a noticeably crisper cyclic and will be faster around center. The machine will feel more precise and provide a “locked-in” feeling. This added performance maintains a very smooth forward and inverted flight. These dampeners work extremely well for smooth flying as well as for intense stick banging 3D flight.
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
|
|
|
HR1054 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 12T - T-REX 450
|
|
HR1055 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 13T - T-REX 450
|
|
|
|
|
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
|
|
|
Align 450 Pro Kit (Combines AT450P-ARB, AT450P-BMU, and AT450P-TSM in one cost saving kit!)
|
|
Align TREX 450 PRO Anti-Rotation Bracket
|
|
|
|
|
|
450 PRO SERIES UPGRADE KIT
FOR ALIGN TREX 450 PRO SERIES HELICOPTER
|
KDE CNC ALUMINUM ANTI-ROTATION BRACKET FOR ALIGN TREX 450 PRO SERIES HELICOPTERS
|
|
|
|
AT450P-BMU Align TREX 450 PRO Battery Mount and Canopy Clip
|
|
Align TREX 450 PRO Tail Servo Mount
|
|
|
|
|
|
Models: all ALIGN TREX 450E PRO series (replaces stock Align part #H45051
|
TAIL SERVO MOUNT
FOR ALIGN TREX 450 PRO SERIES HELICOPTERS
|
|
|
