|
RG50880CFL G5 Flybarless Conversion Kit
|
|
RG50851 G5 Flybarless Center Hub Only
|
List Price: $44.99
Our Price: $44.99
In Stock
|
|
|
List Price: $19.99
Our Price: $19.99
In Stock
|
|
|
|
|
- Use for OUTRAGE G5 Helicopters and Trex 450 class helicopters, This kit contains the parts required to convert a standard G5 head into a flybarless head. The kit requires Outrage G5 blade grips. If you do not have Outrage blade grips consider the full G5 flybarless head or buy blade grips separately.
|
Center Hub for G5 Flybarless System Same as RG50880CFL-02
Spare part for G5 flybarless head which can be used on G5 and Trex 450 class helicopters
|
|
|
|
RG50880CFL-01 G5 Flybarless Swash Driver Base ONLY
|
|
RG50880CFL-03 G5 Flybarless Linkage Rods & Ends
|
List Price: $6.25
Our Price: $6.25
In Stock
|
|
|
List Price: $3.75
Our Price: $3.75
In Stock
|
|
|
|
|
|
Swashplate driver base for G5 flybarless head. Can be used for a flybarless head swashplate driver together with RG50880CFL-04 G5 Flybarless CNC Radius Arm & Swash Driver Lever. Good for G5 and 450 class helis with a 5mm main shaft.
|
Replacement Linkage rods for the G5 flybarless head.
|
|
|
|
RG50880CFL-04 G5 Flybarless CNC Radius Arm & Swash Driver Lever
|
|
MH-LT4102V2 MicroHeli Precision CNC Main Gear (LT version) w/ Hub -T-REX/G5
|
List Price: $7.50
Our Price: $7.50
In Stock
|
|
|
|
Our Price: $29.99
(Out of Stock)
|
|
|
|
|
|
Swashplate driver Radius Arm and Swash Driver lever for G5 flybarless head. Requires RG50880CFL-01 G5 Flybarless Swash Driver Base. Can be used RG50880CFL-01 together with on any 450 5mm head as a swashplate diver for flybarless conversions.
|
This Precision CNC Main Gear is the very last necessary item for T-REX. It is designed to improve performance on the T-REX 450V2 and OUTRAGE G5 helicopters
|
|
|
|
MH-TX4102MG MicroHeli Precision CNC Main Gear - T-REX 450/G5
|
|
Tail Servo Mount for 12mm Diameter Booms
|
|
Our Price: $15.99
(Out of Stock)
|
|
|
List Price: $14.00
Our Price: $14.00
In Stock
|
|
|
|
|
|
It is designed to improve performance on the T-REX 450X/XL/SE helicopters.
|
Tail servo mounts for Trex 450, Outrage G5, Blade 400, and other copters with 12mm diameter tail booms. This set of mounts are CNC machined aluminum and feature a split mount so you can easily remove or add the tail servo mounts to your tail boom on the copter or remove even if you have a bent tail boom. With a bent tail boom you can have a difficult or impossible time removing conventional single piece mounts. If you need to remove or add to your copter after the tail boom is in place these eliminate the need to remove your tail boom from the copter. A great looking functional piece of bling!
|
|
|
|
Rudder Push Rod Guides (For 12mm Diameter Booms)
|
|
|
List Price: $14.00
Our Price: $14.00
In Stock
|
|
|
|
|
Rudder Push Rod Guidest for Trex 450, Outrage G5, Blade 400, and other copters with 12mm diameter tail booms. This set of guides are CNC machined aluminum and feature a split mount so you can easily remove or add guides to your tail boom on the copter or if you have a bent tail boom. With a bent tail boom you can have a hard time removing conventional single piece guides. If you need to remove or add to your copter after the tail boom is in place these eliminate the need to remove your tail boom from the copter. Great looking functional pieces of bling!
|
|
|
