|
Trex 450 Flybarless Head Conversion Kit
|
|
RG50099FL Complete Precision CNC Flybarless Head System 450 Size Helicopter
|
List Price: $69.99
Our Price: $59.99
You save $10.00!
In Stock
|
|
|
List Price: $119.99
Our Price: $104.95
You save $15.04!
In Stock
|
|
|
|
|
|
RJX Flybarless Head conversion Kit for the Trex 450. This is a great conversion head for 450 size helicopters. It is not only good looking but extremely durable. It uses standard 450 Pro feathering shafts, dampers,shims and bearings to maintain compatibility with high wear items. Use your existing swashplate and go flybarless. Fits most copters with 5mm main shafts.
|
- Use for Outrage G5 Helicopters, T-REX 450 and similar helicopters
5mm main shaft
|
|
|
|
Xtreme Production Titanium Turnbuckles for Trex 450
|
|
RG50333-2 Ceramic Ball Bearing 5x11x5mm (685ZZCRM)
|
List Price: $9.20
Our Price: $9.20
In Stock
|
|
|
|
Our Price: $7.20
In Stock
|
|
|
|
|
|
Xtreme Production Titanium Turnbuckles for Trex 450. Tired of popping off links constantly during set-ups? Want to adjust just a quarter turn? The Xtreme Productions turnbuckles are for you. Spend more time flying - make life easier!!
|
- Use for OUTRAGE G5 / Align Trex 450 and compatibles Helicopters main shaft bearing blocks
|
|
|
|
RG50851 G5 Flybarless Center Hub Only
|
|
RG50880CFL-01 G5 Flybarless Swash Driver Base ONLY
|
List Price: $19.99
Our Price: $19.99
In Stock
|
|
|
List Price: $6.25
Our Price: $6.25
In Stock
|
|
|
|
|
Center Hub for G5 Flybarless System Same as RG50880CFL-02
Spare part for G5 flybarless head which can be used on G5 and Trex 450 class helicopters
|
Swashplate driver base for G5 flybarless head. Can be used for a flybarless head swashplate driver together with RG50880CFL-04 G5 Flybarless CNC Radius Arm & Swash Driver Lever. Good for G5 and 450 class helis with a 5mm main shaft.
|
|
|
|
RG50880CFL-03 G5 Flybarless Linkage Rods & Ends
|
|
RG50880CFL-04 G5 Flybarless CNC Radius Arm & Swash Driver Lever
|
List Price: $3.75
Our Price: $3.75
In Stock
|
|
|
List Price: $7.50
Our Price: $7.50
In Stock
|
|
|
|
|
|
Replacement Linkage rods for the G5 flybarless head.
|
Swashplate driver Radius Arm and Swash Driver lever for G5 flybarless head. Requires RG50880CFL-01 G5 Flybarless Swash Driver Base. Can be used RG50880CFL-01 together with on any 450 5mm head as a swashplate diver for flybarless conversions.
|
|
|
|
MH-LT4102V2 MicroHeli Precision CNC Main Gear (LT version) w/ Hub -T-REX/G5
|
|
MH-TX4102MG MicroHeli Precision CNC Main Gear - T-REX 450/G5
|
|
Our Price: $29.99
(Out of Stock)
|
|
|
|
Our Price: $15.99
(Out of Stock)
|
|
|
|
|
|
This Precision CNC Main Gear is the very last necessary item for T-REX. It is designed to improve performance on the T-REX 450V2 and OUTRAGE G5 helicopters
|
It is designed to improve performance on the T-REX 450X/XL/SE helicopters.
|
|
|
|
Carbon Fiber Tail Boom for Trex 450 (347MM)
|
|
T-REX 450 FRP Main frame (5 PCS)(1.2mm)
|
List Price: $7.98
Our Price: $7.98
(Out of Stock)
|
|
|
List Price: $11.98
Our Price: $11.98
In Stock
|
|
|
|
|
Carbon fiber tail boom for Trex 450
347mm length
Trex 450 XL/V2/Pro
|
Blade main frame set and battery plate for Trex 450 V2.
|
|
|
|
Aluminum Stabilizer Set 450
|
|
Tail Servo Mount for 12mm Diameter Booms
|
List Price: $8.50
Our Price: $8.00
You save $0.50!
(Out of Stock)
|
|
|
List Price: $14.00
Our Price: $14.00
In Stock
|
|
|
|
|
Aluminum vertical and horizontal stabilizers for Trex 450/Pro and compatible helicopters.
These fins look great and more durable than FRP and CF fins
|
Tail servo mounts for Trex 450, Outrage G5, Blade 400, and other copters with 12mm diameter tail booms. This set of mounts are CNC machined aluminum and feature a split mount so you can easily remove or add the tail servo mounts to your tail boom on the copter or remove even if you have a bent tail boom. With a bent tail boom you can have a difficult or impossible time removing conventional single piece mounts. If you need to remove or add to your copter after the tail boom is in place these eliminate the need to remove your tail boom from the copter. A great looking functional piece of bling!
|
|
|
|
Rudder Push Rod Guides (For 12mm Diameter Booms)
|
|
HR1053 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 11T - T-REX 450
|
List Price: $14.00
Our Price: $14.00
In Stock
|
|
|
|
Our Price: $2.50
In Stock
|
|
|
|
|
|
Rudder Push Rod Guidest for Trex 450, Outrage G5, Blade 400, and other copters with 12mm diameter tail booms. This set of guides are CNC machined aluminum and feature a split mount so you can easily remove or add guides to your tail boom on the copter or if you have a bent tail boom. With a bent tail boom you can have a hard time removing conventional single piece guides. If you need to remove or add to your copter after the tail boom is in place these eliminate the need to remove your tail boom from the copter. Great looking functional pieces of bling!
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
|
|
|
HR1054 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 12T - T-REX 450
|
|
HR1055 "Rhino Gear" Ultra Hardened Steel Pinions - 0.5M 13T - T-REX 450
|
|
Our Price: $2.50
In Stock
|
|
|
|
Our Price: $2.50
In Stock
|
|
|
|
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
For pinions as tough as a Rhinoceros!
Try our new Rhino Gear pinions! No more days of landing after a flight of EXTREME 3D to find your pinion teeth looking as if they have melted away, or snapping a pinion in-flight due to improper hardening!
A Rhino Gear pinion could be the last pinion you will ever purchase! They are machined to exacting specifications from high quality carbon steel and then Ultra-Hardened for lasting durability and outstanding strength! Maintaining these tight specifications means less gear noise and less wear on your helicopter's main gear.
|
|
|
|
Align TREX 450 Bottom Bracket Upgrade
|
|
Align TREX 450 and 450 PRO Performance Tail Upgrade Version 2
|
|
Our Price: $49.50
In Stock
|
|
|
|
Our Price: $19.95
In Stock
|
|
|
|
|
BOTTOM BRACKET UPGRADE
FOR ALIGN TREX 450 SERIES HELICOPTERS
|
PERFORMANCE TAIL UPGRADE V2
FOR ALIGN TREX 450 SERIES HELICOPTERS
|
|
|
