|
DJI NAZA H Helicopter Stabilization Controller
|
|
DJI NAZA H Helicopter Stabilization Controller w/GPS & Free BEC
|
|
|
|
|
|
The Naza-H autopilot system is a new platform designed for the helicopter model enthusiast. It inherits the Naza series’ All-in-One design with an inner damping and many other built-in high performance functions (tail gyro, flybarless, and multiple flight control modes) and it also supports D-BUS. The Naza H comes with the main controller module and the LED indicator box for signalling status and flight mode. The Naza M controller features 3 axis gyros, 3 axis accelerometers and a barometer for altitude hold.
The Naza H has modes for manual flying as well as stabilized (self leveling and altitude hold) right out of the box. It also feature easy setup capability including auto trim for flybarless copters. With the optional GPS module the Naza H gains position hold capability as well as Failsafe position hold to help prevent a crash in the case of loss of RC control. The GPS add on module has both GPS receiver and a 3 axis magnetometer. From novice to aggressive 3D, the Naza-H perfectly meets the needs of different flying styles. It is not just another FBL controller; it is the best choice for the discerning model helicopter pilot.
|
We are sure sales will be strong so order now if you want one. Initial quantities will be limited.
The Naza-H autopilot system is a new platform designed for the helicopter model enthusiast. It inherits the Naza series’ All-in-One design with an inner damping and many other built-in high performance functions (tail gyro, flybarless, and multiple flight control modes) and it also supports D-BUS. The Naza H comes with the main controller module and the LED indicator box for signalling status and flight mode. The Naza M controller features 3 axis gyros, 3 axis accelerometers and a barometer for altitude hold. The Naza H has modes for manual flying as well as stabilized (self leveling and altitude hold) right out of the box. It also feature easy setup capability including auto trim for flybarless copters. With the optional GPS module the Naza H gains position hold capability as well as Failsafe position hold to help prevent a crash in the case of loss of RC control. The GPS add on module has both GPS receiver and a 3 axis magnetometer. From novice to aggressive 3D, the Naza-H perfectly meets the needs of different flying styles. It is not just another FBL controller; it is the best choice for the discerning model helicopter pilot. |
|
|
|
DJI NAZA H Power Management Unit (BEC)
|
|
DJI NAZA MULTI-ROTOR STABILIZATION CONTROLLER
|
|
|
|
|
|
The independent DJI Naza H High Voltage BEC module, with a wide voltage input range (11V-52V) and a variable voltage output (5.8V, 7.4V) can power not only the main controller, but also the servos and receiver. Users can change the output voltage according to their servos, and stable output voltage is provided without an extra battery pack. The use of the BEC makes the aircraft lighter and the voltage more stable, plus less batteries to worry about.
Programmable through the DJI Naza H setup software
|
NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a small all-in-one module. It has D-Bus support, upgrade support, and extendible port. Different from WooKong-M for heavy payloads and aerophotography, NAZA not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience. DJI released the GPS for NAZA-M and NAZA-M GPS package on June, 2012. The Naza–M GPS greatly enhances the function of NAZA-M and hits the model aircraft market as a blockbuster.
|
|
|
3DR APM 2.5+ Assembled Set (Side entry) with Power Module/XT60
|
|
3DR Radio Telemetry Kit - 915 Mhz (US)
|
|
|
|
|
|
|
The incredible 3DR APM 2.5+ Autopilot and Flight Stablilization System. The APM 2.5+ autopilot system is suitable for multicopters and planes and even has firmware for helis and ground vehicles. A extremely versatile autopilot with a mature software ecosystem including Ground Controls Station and multiple firmwares for specific applications. Opensource software allows for customization if desired.
|
The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz (US) and 433Mhz (Europe and other countries that don't allow 915Mhz); and in the following configurations: serial board (for the air) and USB (for the ground). Add this to your APM Flight controller and get Ground Control Station capability with full telemetry including artificla horizon, GPS tracking on satellite maps, battery voltage and current, ground speed etc.
|
|
|
|
3DR GPS uBlox LEA-6
|
|
3DR MediaTek MT3329 GPS V2.0
|
|
|
|
|
|
|
This is our best GPS module, and significantly outperforms the Mediatek GPS due to the larger antenna and next-gen chipset. Recommended for multicopters and rover in particular, where GPS accuracy is paramount. The device itself is pretty straight-forward. It has active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units will ship pre-configured for ArduPilot Mega use. A perfect match with the APM 2.5 Autopilot.
|
The popular MediaTek GPS now with battery backup for faster warm GPS locks and improved ground plane for improved satellite reception. Note that the new MediaTek has custom "DIYDrones" firmware that allows the unit to output an efficient and very compressed binary protocol (This firmware is setup for the APM flight controllers). You can still change between NMEA and Binary protocol with standard MTK messages, and switch the refresh rate between 1hz to 10hz, or set any standard serial baud rate (by default is set to 38400 bps and custom binary protocol).
|
|
|
|
DJI Naza M V2 Multirotor Flight Controller
|
|
DJI 5.8GHZ Video Downlink (Transmitter + Receiver) [DJI-5.8VDL]
|
|
|
|
|
|
|
Preorder now! Soon to be released in the US NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a small all-in-one module. It has D-Bus support, upgrade support, and extendible port. Different from WooKong-M for heavy payloads and aerophotography, NAZA not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience. The new Naza M V2 improves upon the performance of the Naza M and adds features sucha a Compass self tuning, RTH via switch, advanced IMU calibration, and the bility to interface with the DJI OSD and video transmitters for FPV and video streaming. A great upgrade.
|
The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ.
The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission
|
|
|
|
HSXT60MF2 XT60 connectors (2 pair with heat shrink)
|
|
HSTPMF Dean's style Ultra T-plug with Grips (2 pair with heat shrink)
|
|
|
|
|
|
|
Made from high-temp nylon and gold plated spring connectors, both included in the injection mold at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant current. Color may be yellow or blue depending on availability.
|
These plugs feature gold plating for low contact resistance and grips for easy disconnect.
|
|
|
|
HSTPMF Dean's style Ultra T-plug with Grips (2 female plugs with heat shrink)
|
|
HSTPMF Dean's style Ultra T-plug with Grips (2 male plugs with heat shrink)
|
|
|
|
|
|
|
These plugs feature gold plating for low contact resistance and grips for easy disconnect.
|
These plugs feature gold plating for low contact resistance and grips for easy disconnect.
|
|
|
|
DJI NAZA M GPS Upgrade
|
|
DJI NAZA-H GPS Upgrade
|
|
|
|
|
|
|
Naza GPS Add on package. Buy this GPS add on package to add GPS to your current Naza controller. Just update the firmware and add the GPS/Compass and you are ready to enjoy the benefits of the Naza GPS.
Features: RTH (Return-To-Home); IOC (Intelligent Orientation Control) and Low Battery warning.
|
Naza-H GPS Add on package. Buy this GPS add on package to add GPS to your current Naza-H controller. Adds Position Hold and Failsafe Position Hold capability with more features to come!! The module adds 3 axis magnetometers and GPS sensors. Plug it in , run though the setup process and you are ready to go.
|
|
|
|
Hyperion EOS 0720i Super DUO3 charger - 2 x 1S-7S, 20A max, 1000W
|
|
Sky RC eFUEL 1200 Watt 15-24 Volt 60 Amp DC Power Supply
|
|
|
|
Our Price: $219.95
(Out of Stock)
|
|
|
|
|
|
The Hyperion EOS0720i DUO III V3 dual port 1000 watt charger/balancer. Simply the best most powerful charger you can get!
|
General Description
The eFUEL switching DC Power Supply is designed to use household AC power source to power equipment that required DC power. The eFUEL converts standard household power 100-120V AC or 200-240V AC to 15-24V DC power and can supply up to 60 amperes of continuous power. The maximum output current is regulated by the output power of this power supply and does not exceed 60 Ampere. Maximum Current = 1200W divide by output voltage. ( eg. DC20V output, maximum current = 1200W / 20V = 60A; DC24V output, maximum current = 1200W / 24V = 50A.)
|
|
|
|
Sky RC eFUEL 540 Watt 9-18 Volt 30 Amp DC Power Supply
|
|
SJGD Mini One Gyro/LCD Combo
|
|
Our Price: $109.95
(Out of Stock)
|
|
|
|
|
|
General Description
The eFUEL switching DC Power Supply is designed to use household AC power source to power equipment that requires DC power. The eFUEL converts standard household power 110-120V AC or 200-240V AC to 9-18V DC power and can supply up to 30 amperes of continuous power. If you are R/C hobbyist, technician or electronic hobbyist, you will appreciate the many uses for a high output DC power supply at your workbench or in your house. For example, power your battery chargers, check the operation of auto sound systems before installation into your vehicle, use your CB mobile transceiver as a base station. To top it all off, you can even power your mobile phone, digital camera or even your iPhone via the USB port.
|
SJGD is pleased to release the new Mini One gyro. The Mini One succeeds the popular and acclaimed PG-800 gyro. The Mini One gyro is based on a premium MEMS sensor and is diminutive in size but
not in performance. It is suitable for extreme 3D as well as sport and scale flight styles. The tail authority of the Mini One is astounding and pirouette rates are smooth and consistent. It can be used on anything from 200 class copters to heart pounding 90 class nitro copters. The Mini One is a truly versatile world class gyro at an affordable price. It sets a new benchmark for performance versus price.
|
|
|
