Join our mailing list!


Follow US











You are here: Home > Multicopters > Multicopter Kits
Sort By:
1 2
Tarot 680Pro RTF Aerial Photography Platform with Sony Nex 6 Accipiter 250 FPV Quad RTF
Our Price: $2,999.00
In Stock
Our Price: $410.00
In Stock
A complete Aerial Photography package ready to fly. 5.8GHz video downlink to allow framing of shots. Step up from GoPro capability to a mirrorless DLSR camera. The highly acclaimed Sony Nex6 is featured in this platform. 16.1 megapixel sensor with 1080P video capabilityRemotely trigger either photo or video.

The flight control system is the 3D Robotics 32 bit Pixhawk with advance flight modes and safety features. Full GPS guidance with RTF failsafe. Ground Station and remote mission capable(Data modem optional). Follow me mode and spline curve flying give this platform truely impressive content creation capabilities.
Welcome to the new class of 250 mini FPV racing barnstorming mini quadcopters. The Explorer 250 is designed to be strong, durable, light and loads of fun. The Explorer 250 can take a beating and keep on going. 250 miniquads are taking the community by storm for good reason.

The frame is constructed of G10 providing exceptional strength and impact resistance. 3mm G10 arms are sandwiched between G10 plates creating a stressed skin structure which is extremely stiff. The top battery mount plate is attached with aluminum standoffs. The resulting copter can resist extreme crashes and keep on going. You can actually stand on this little frame without damaging it!

Accipiter 300 FPV Quad Accipiter 300 FPV Quad RTF
Our Price: $120.00 Add Options and Update Price
In Stock
Our Price: $420.00
In Stock
The Accipiter 300 Quad is based on the successful Accipiter 250 mini FPV racing barnstorming quadcopter.. The Accipiter 300 keeps the strength, durability and nimbleness of the 250 while increasing payload capability. The Accipiter 300 is designed to allow use of 6 inch props and when matched with motors such as the Sunnysky 2204-2300 significantly increases lift capability allowing even a Gopro to be mounted as well as larger batteries.

The frame is constructed of G10 providing exceptional strength and impact resistance. 3mm G10 arms are sandwiched between G10 plates creating a stressed skin structure which is extremely stiff. Embedded PEM nuts are used rather than standard nuts used on others. The top battery mount plate is attached with aluminum standoffs. The resulting copter can resist extreme crashes and keep on going. You can actually stand on this little frame without damaging it!

The Accipter 300 Mini Quad Ready to Fly Version. Includes frame, motors, 6030 props, ESCs, power distribution board, Spectrum compatible 6 channel receiver with the Flip EX MultiWii flight controller. Prebuilt, set up and ready to fly. Just add your battery and setup with your transmitter. Does not include FPV camera or transmitter.

The Accipiter 300 Quad is based on the successful Accipiter 250 mini FPV racing barnstorming quadcopter.. The Accipiter 300 keeps the strength, durability and nimbleness of the 250 while increasing payload capability. The Accipiter 300 is designed to allow use of 6 inch props and when matched with motors such as the Sunnysky 2204-2300 significantly increases lift capability allowing even a Gopro to be mounted as well as larger batteries.


Accipiter 250 FPV Quad Helistorm DJI Phantom 2 Electronics Tray
Our Price: $90.00 Add Options and Update Price
In Stock
Our Price: $15.00
In Stock
Welcome to the new class of 250 mini FPV racing barnstorming mini quadcopters. The Explorer 250 is designed to be strong, durable, light and loads of fun. The Explorer 250 can take a beating and keep on going. 250 miniquads are taking the community by storm for good reason.

The frame is constructed of G10 providing exceptional strength and impact resistance. 3mm G10 arms are sandwiched between G10 plates creating a stressed skin structure which is extremely stiff. The top battery mount plate is attached with aluminum standoffs. The resulting copter can resist extreme crashes and keep on going. You can actually stand on this little frame without damaging it!

Upgrading your Phantom 2 with a video downlink? Trying to fit the OSD, video transmitter, Bluetooth Unit and FPV hub on your copter? The Phantom 2 Electronics tray provides a quick and easy way to fit all your upgrades in an organized and safe way.
Easy to install the tray bolts on under the gimbal anti-vibration mount. With enough room and tie down slots to mount and secure all the options you need. A easy low cost must have upgrade if your are adding additional electonics on your Phantom 2

Designed and manufactured in the USA.

Helistorm Rail Accessory Tray Anti Vibration Mount Helistorm 550 Landing Gear Replacement Legs (2)
Our Price: $14.00
In Stock
Our Price: $18.00
In Stock
The optional Rail Accessory Tray serves as a mount for your FPV / data modem transmitter. Many 200mW FPV systems will fit inside the RAT providing protection for your FPV transmitter. Mounting the transmitter on the rear of the rail mount system also removes the transmitter from other sensitive electronics reducing the potential of RF interference. Through holes allow a SMA style bulkhead fitting for internally mounted transmitters protecting the transmitter and giving a clean installation.. Transmitter / receiver batteries can also be mounted on the accessory tray helping tune COG to offset front mounted cameras and gimbals. The Rail Accessory Tray is made for standard 10mm rail mount tubes with 60mm spacing

Designed and manufactured in the USA.

Contains 2 replacement landing gear legs for the HeliStorm 550 Landing Gear
Designed and manufactured in the USA.

Explorer Racing and FPV Quadcopter Helistorm DJI F550 Landing Gear System
Our Price: $180.00
In Stock
Our Price: $180.00 Add Options and Update Price
In Stock
The new Explorer frame is designed from the start for FPV and racing enthusiasts. The Explorer is light, aerodynamic, durable and built to hold the gear required for FPV flying. Built and designed by multicopter and FPV enthusiasts the Explorer has what it takes to have a great time.

Unlike your typical quad with a symmetrical shape the Explorer has a long center tube instead of a large plate assembly. This not only reduces drag but also improves your ability to determine the orientation of the copter in flight. This also allows the camera to be mounted forward to eliminate visible arms and props in the frame of the picture
Introducing the new HeliStorm Landing Gear System for the DJI F550 and similar multicopters. Designed by and for multicopter and FPV / Aerial photography enthusiasts. This G10 and aluminum landing gear features a sturdy construction, integrated capability for rail mount system. Options include 10m camera rails, Bottom Battery Tray and Rail Accessory Tray for electronics. The rail system is industry standard for mid size systems utilizing 10mm rods and 60mm rail spacing. Most small camera gimbal systems such as the Tarot H32D GoPro gimbal can clip right in place.

Helistorm Rail Accessory Tray Helistorm Bottom Battery Mount
Our Price: $25.00
In Stock
Our Price: $15.00
In Stock
The optional Rail Accessory Tray serves as a mount for your FPV / data modem transmitter. Many 200mW FPV systems will fit inside the RAT providing protection for your FPV transmitter. Mounting the transmitter on the rear of the rail mount system also removes the transmitter from other sensitive electronics reducing the potential of RF interference. Through holes allow a SMA style bulkhead fitting for internally mounted transmitters protecting the transmitter and giving a clean installation.. Transmitter / receiver batteries can also be mounted on the accessory tray helping tune COG to offset front mounted cameras and gimbals. The Rail Accessory Tray is made for standard 10mm rail mount tubes with 60mm spacing

Designed and manufactured in the USA.

This is the bottom battery mount accessory for the HeliStorm FW550 Landing Gear. It allows a large battery to be placed below the frame and allows for Center of Gravity adjustments for systems with items such as a forward mounted gimbal.

Helistorm DJI F550 Upper Plate and Vibration Isolation Mount Helistorm 10mm Camera Mount Rails (2)
Our Price: $30.00
In Stock
Our Price: $20.00
In Stock
The HeliStorm Flight Controller Vibration Isolation Mount replaces the stock DJI F550 top plate and provides and recessed vibration isolated mount plate  The F550 frame is incedible durable but can have significant vibration levels. The vibartion system isolates your flight controller from vibrations that can affect it's performance as well as provides some additional protection by recessing the flight controller.  The isolation mount allows for many flight controllers such as Arducopter, OpenPilot, DJI, Pixhawk and others. Wiring can be recesed below the top plate protecting the sensitive and fragile connections in the advent of a crash.  Ample room is provided to allow access to wiring and USB ports.  A low cost highly functional upgrade to your F550. The optional 10mm Camera Mount Rails allow accessories to be mounted to the Landing Gear easily and securely. The 10mm rail standard allows many common accessories to be add such as the Tarot 2 axis brushless gimbal. The rails are 15 inches long (380mm) and allow for simultaneous mounting on the front and rear of the landing gear. Comes with 2 rails and 4 isolation grommets.

DJI Phantom 2 Vision RTF Quadcopter with Transmitter, Charger LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter
Our Price: $999.99
In Stock
Our Price: $149.95
In Stock

The Phantom Vision builds on the breakthrough DJI Phantom Quadcopter. Increasing flight time to 20 minutes plus, adding a High Definition camera plus allowing camera control and setting as well as video viewing with a Iphone/Ipad device the Phantom Vision brings All in One functionality to a all new level. New larger battery and improved efficiency blades dramatically improve flight time and performance of the new DJI Phantom quadcopter.

The Phantom is a All IN ONE SOLUTION. READY TO FLY and SHOOT VIDEO out of the box. It features the DJI Naza M Integrated flight control system including GPS tuned by DJI for the Phantom. The Phantom is easy to operate and very stable. Aerial filming is fun fun and easy and the Phantom Vision and require no additional camera purchase. It comes with a dedicated remote control transmitter included as well as one Lipo flight pack battery and balancing charger.
The LaTrax Alias Quad-Rotor  Ready-To-Fly Helicopter is the easy way to experience acrobatic flying thrills and high-speed airborne excitement. The Alias has incredible durability making it ideal for both beginners and those wanting to try high performance aerobatic maneuvers. (See the videos!!)  Normal Flight mode makes it easy for anyone to quickly master hovering and flight just minutes after takeoff. Quad-rotor thrust and 6-axis stabilization combine in Expert Flight Mode for lightning quick response, high-speed banking turns, flips, and snap rolls. Let go of the sticks, and the copter returns to stable flight.  A great mini quad for everyone both experienced and beginners.  Backed by a great warranty and replacement program.
DJI Phantom 2 Vision + RTF Quadcopter with 3 Axis Gimbal DJI Inspire 1 with Two Remote Controllers
Our Price: $1,159.00
Sale Price: $1,159.00
Our Price: $3,399.00
The Phantom 2 Vision + adds 3 axis camera stabilization to the DJI Phantom series. Angular range of the new gimbal is improved allowing shots straight down now. The video downlink range is also extended up to a range of 700 meters versus the 300 meters of the Vision. Flight times to 25 minutes plus remain. The Phantom 2 Vision + is a great upgrade to the Phantom 2 line.

Now shipping with new improved remote control transmitter.
The new Advanced Ready to Fly aerial photography system by DJI. The future is yours with the most advanced AP system available to date from DJI.

This is the two transmitter version allowing camera to be controlled form one remote and the copter to be pilottted from one remote controller.
DJI Inspire 1 with One Transmitters DJI Phantom 2 Vision Version 3 with HD Camera and 3 Axis Gimbal
Our Price: $2,899.00
Our Price: $1,299.00
The new Advanced Ready to Fly aerial photography system by DJI. The future is yours with the most advanced AP system available to date from DJI.

This is the one transmitter version.
This is the newest version of Phantom 2 Vision+ with rechargeable remote control, 9450 props and updated motors and compass.

The Phantom 2 Vision+ ushers in a new era of aerial cinematography with its brand new and incredibly stable

3-axis gimbal , combined with the sharp, powerful DJI-designed camera, making professional imaging tools easily accessible to everyone.
   
 
1 2