|
DJI NAZA H Helicopter Stabilization Controller
|
|
DJI NAZA H Helicopter Stabilization Controller w/GPS & Free BEC
|
|
|
|
|
|
The Naza-H autopilot system is a new platform designed for the helicopter model enthusiast. It inherits the Naza series’ All-in-One design with an inner damping and many other built-in high performance functions (tail gyro, flybarless, and multiple flight control modes) and it also supports D-BUS. The Naza H comes with the main controller module and the LED indicator box for signalling status and flight mode. The Naza M controller features 3 axis gyros, 3 axis accelerometers and a barometer for altitude hold.
The Naza H has modes for manual flying as well as stabilized (self leveling and altitude hold) right out of the box. It also feature easy setup capability including auto trim for flybarless copters. With the optional GPS module the Naza H gains position hold capability as well as Failsafe position hold to help prevent a crash in the case of loss of RC control. The GPS add on module has both GPS receiver and a 3 axis magnetometer. From novice to aggressive 3D, the Naza-H perfectly meets the needs of different flying styles. It is not just another FBL controller; it is the best choice for the discerning model helicopter pilot.
|
We are sure sales will be strong so order now if you want one. Initial quantities will be limited.
The Naza-H autopilot system is a new platform designed for the helicopter model enthusiast. It inherits the Naza series’ All-in-One design with an inner damping and many other built-in high performance functions (tail gyro, flybarless, and multiple flight control modes) and it also supports D-BUS. The Naza H comes with the main controller module and the LED indicator box for signalling status and flight mode. The Naza M controller features 3 axis gyros, 3 axis accelerometers and a barometer for altitude hold. The Naza H has modes for manual flying as well as stabilized (self leveling and altitude hold) right out of the box. It also feature easy setup capability including auto trim for flybarless copters. With the optional GPS module the Naza H gains position hold capability as well as Failsafe position hold to help prevent a crash in the case of loss of RC control. The GPS add on module has both GPS receiver and a 3 axis magnetometer. From novice to aggressive 3D, the Naza-H perfectly meets the needs of different flying styles. It is not just another FBL controller; it is the best choice for the discerning model helicopter pilot. |
|
|
|
DJI NAZA H Power Management Unit (BEC)
|
|
DJI NAZA-H GPS Upgrade
|
|
|
|
|
|
The independent DJI Naza H High Voltage BEC module, with a wide voltage input range (11V-52V) and a variable voltage output (5.8V, 7.4V) can power not only the main controller, but also the servos and receiver. Users can change the output voltage according to their servos, and stable output voltage is provided without an extra battery pack. The use of the BEC makes the aircraft lighter and the voltage more stable, plus less batteries to worry about.
Programmable through the DJI Naza H setup software
|
Naza-H GPS Add on package. Buy this GPS add on package to add GPS to your current Naza-H controller. Adds Position Hold and Failsafe Position Hold capability with more features to come!! The module adds 3 axis magnetometers and GPS sensors. Plug it in , run though the setup process and you are ready to go.
|
|
|
|
SK-720 Flybarless System without Power Bus
|
|
SK540 Flybarless System
|
|
|
|
|
|
The SK-720 replaces the tail gyro, mechanical flybar, and receiver on your R/C Helicopter. Other features include flight logging with playback, optional-self leveling, and more to come!
This unit is ideal for pilots from beginner to 3D expert. Go flybarless!
|
The SK 540 is Skookum Robotics next-generation flybarless system, ready for any pilots wanting rock solid flybarless control. The SK 540 features 3D Masters-proven flight control, dual 3-axis MEMS gyros, and an integrated governor and CNC aluminum case. Whether you’re new to helis or you’re already flying smack 3D, the SK 540 is ready for you!
|
|
|
|
H45162 Align Trex 450DFC Main Rotor Head Upgrade Set
|
|
H45162QN Align Trex 450DFC Main Rotor Head Upgrade Set / Blue
|
|
|
|
|
|
|
Following the design of the highly acclaimed 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system realizes a extremely low CG, effectively reduces resistance during flight,
increased flight responsiveness and precision, resulting in superior 3D
performance and unimaginable flight speed with extremely attractive design.
|
Following the design of the highly acclaimed 700 DFC/600 DFC's design, the 450 DFC flybarless rotor head system realizes a extremely low CG, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D
performance and unimaginable flight speed with extremely attractive design. This 450 DFC head kit is blue.
|
|
|
|
Ikon Flybarless System [IKN1001]
|
|
KDS-EBAR Flybarless System
|
|
|
|
|
|
|
iKon - Are You Ready?
Brought forth by MSH - the makers of the 'Brain' - the iKon represents a new leap in flybarless control. Bert Kammerer, in cooperation with MSH, worked tirelessly to fine tune the iKon flybarless controller to perfection. Every aspect of firmware has been fine-tuned and optimized, and in the end, we can say this system simply has no equal on the market today. The iKon is ready to change everything. Get ready for the iKon - it's ready for you.
|
The KDS EBAR is a 3 axis flybarless controller systems. It is perfect for all helis from 250 to 700 size nitro copters. The 3 axis system keeps the helicopter stable in windy conditions and includes piro compensation to allow flat piros even in windy conditions. The EBAR controller is diminutive allowing easy mounting on most RC helicopters even small 200 size copters.
|
|
|
|
Align 3GX Programmable Flybarless System HEG3GX01
|
|
KDE FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 500 SERIES HELICOPTERS
|
|
|
|
|
|
|
The brand new redesigned 3GX represents a new generation of multi function flybarless systems. The dramatically improved performance will create immediate impact on any enthusiasts.
|
KDE Flybarless head design for the Trex 500. Advanced design that needs no separate swashlocker which ensure proper phasing and increases strength and durability of the head.
Models: all ALIGN TREX 500E and 500ESP series (replaces stock Align part #H50125).
|
|
|
|
KDE FLYBARLESS MAIN ROTOR HOUSING FOR ALIGN TREX 450 SERIES HELICOPTERS
|
|
KDE Flybarless Main Rotor Housing for Align Trex 550/600 Series Helicopters
|
|
|
|
|
|
KDE Flybarless head design for the Trex 450. Advanced design that needs no separate swashlocker which ensure proper phasing and increases strength and durability of the head.
Models: ALIGN TREX 450 Pro
|
KDE Flybarless head design for the Trex 550 and Trex 600 helicopters Advanced design that needs no separate swashlocker which ensure proper phasing and increases strength and durability of the head.
Models: ALIGN TREX 550E, 600E, 600ESP, and 600N series (replaces stock Align part #HN6112 and #H55007).
|
|
|
|
Trex 700 flybarless head assembly
|
|
RJX 50 Flybarless Assembly (for 600/600N/Raptor50/Vibe50/X-50)
|
|
|
|
|
|
RJX Flybarless Head conversion for Trex 700
Upgrade your T-REX 700 to flybarless! The RJX Flybarless head
includes all items to replace the factory Align flybared head. The RJX flybarless head has been highly reviewed and is an exceptional value.
|
RJX Flybarless Head conversion for Trex 600/600N, Outrage 550, Raptor50, Vibe 50, X-50 - 10mm Main Shaft
Upgrade your T-REX 600 or 50 size heli to flybarless! The RJX Flybarless head includes all items to replace the factory Align flybared head. The RJX flybarless head has been highly reviewed and is an exceptional value.
|
|
|
|
Trex 500 Flybarless Head Conversion Kit
|
|
Trex 450 Flybarless Head Conversion Kit
|
|
|
|
|
|
The RJX FL500U Trex 500 Flybarless Head Conversion Kit
Using existing Align components the FL500U allow you to use existing Align parts.
A durable and sturdy flybarless head for the Trex 500.
|
RJX Flybarless Head conversion Kit for the Trex 450. This is a great conversion head for 450 size helicopters. It is not only good looking but extremely durable. It uses standard 450 Pro feathering shafts, dampers,shims and bearings to maintain compatibility with high wear items. Use your existing swashplate and go flybarless. Fits most copters with 5mm main shafts.
|
|
|
|
H50133 Trex 500FL Main Shaft
|
|
H50180 Trex 500FL Metal Control Arm
|
|
|
|
|
|
Use for T-REX 500E 3G Flybarless System
●500FL Main shaft x 2(Φ4*Φ8*148.8mm)
●Socket screw x 2(M3x3mm)
●Socket collar screw x 2(M2.5x19mm)
●M2.5 nut x 2
|
Use for T-REX 500EFL / 500EFL PRO Flybarless System.
|
|
|
