Join our mailing list!

Follow US

  Home > Electronics >

  Align 3GX Programmable Flybarless System HEG3GX01

Our Price: $238.00

Stock Status: (Out of Stock)

Product Code: HEG3GX01

Description Technical Specs Extended Information

brand new redesigned 3GX represents a new generation of multi function flybarless systems. The dramatically improved performance will create immediate impact on any enthusiasts. The 3GX is currently the smallest and lightest flybarless system on the market.

Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system eliminating the need for separate receivers. Additionally with 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce complexity and  wire clutter.

Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.  Graphical illustrated instructions on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.  A library of pre-configured 3GX settings is available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.  Three levels of flight modes are available on the 3GX to provide different feels from beginners to advanced pilots.
  Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.

The 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to the last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.The 3GX is suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape. The 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet possesses explosive agility. With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
The 3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.

Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
  • Easy set up for first-time users
  • Flybarless stabilization with piro-compensation
  • Built-in tail gyro, supporting most all tail servos by name in the setup software
  • Supports use as a 9-channel receiver core when used with 2.4 GHz satellite receivers (two dedicated Sat-RX ports)
  • Works with Digital or Analog swash servos
  • Suitable for 120, 135/140, and 90 degree eCCPM, as well as mCCPM swashplates
  • Works with 2,3,4, or 5 blades, with phase trim adjustable to +-90°
  • Swash Ring anti-binding algorithm
  • Internal swash mixing, for accurate control
  • Supports radios with either 1024 or 2048 servo steps, and 22ms or 11ms frame rates
  • Can also be used with traditional R/C receivers
  • Expansion port for future accessories such as GPS
  • 38 x 30 x 14 mm, 17 grams
  • 8.5 volt capable
  • Optional 20 amp external power bus (included) for larger than 50-size and nitro helis (15 grams). Make brownouts a thing of the past!
  • 3-axis accelerometer + 3 gyros, allowing self-leveling
  • High-power 32 bit processor (for future upgradeability)
  • Expansion port for GPS or a third sat-receiver
  • Up to 10 servos (one tail servo, 4 digital swash servos, Throttle, and 4 Aux channels)
  • Port for a remote indicator LED , which you can mount outside of the canopy
  • Built in micro-SD card (2 GB flight-data logging)
  • Built in USB mass storage device - Connect the unit to your computer without having to install drivers
  • Flight data logs can be played back on your PC with analysis of tuning and heli health
  • Compatible with the Skookum SK-LCD terminal
  • Existing SK360 setup files can be easily up-converted for the new unit
●USB Link cable set x 1
●USB extension cable x 1
●Signal wire x 3
●Bind Plug x1
●3GX Sticker x1
●Installation CD x 1

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Electronics > Flight Stabilization Systems
Electronics > Flight Stabilization Systems > Skookum
Flybarless > Flybarless electronics